| CLAMP METERS
-----------------
Analyst 2060 Power Quality Clamp Meter (LEM)
The Analyst 2060 Power Quality Clamp Meter for today’s electrical environment
The ideal measurement tool for monitoring and troubleshooting in the modern ‘noisy’ electrical environment typically found with switching loads such as drives and high efficiency lighting. The Analyst 2060 combines the functionality of a current clamp, power quality meter, oscilloscope and data logger in a single handheld instrument that has been designed for safety and ease of use.
• The range of measurements offered by
the Analyst 2060 is suitable for:
• Commissioning and maintaining
variable speed drives
• Installing and testing of dc power systems
• Measurement of harmonics voltage and
current on industrial systems
• Quick data evaluation with large bright
display for waveform, chart and
multi-parameter display
• Immediate harmonics analysis
with ‘live’ bargraph display (to 25th)
Fluke 321/322 Clamp Meters
Big features, small package
The Fluke 321 and 322 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 322 also offers DC voltage measurements and has a higher resolution for loads below 40 A.
Fluke 330 Series Clamp Meters
Take a new look at current measurement
With the striking design of the Fluke 330 Series, we've taken a new look at the way you make current measurements. At how you use your tools, and how to get the results you need, faster and more conveniently. The result is a new, ergonomic concept, shaped to fit your hand and to access tight spots easily. The series feature a large display that is backlit -on most models- so readings can be taken in virtually any lighting situation. Auto-shut-off maximizes battery life so the meter works when you need it. A choice of five models gives you the right functions for your measurements.
Fluke 902 True-rms HVAC Clamp Meter
Heating, ventilation, air conditioning (HVAC) technicians require a service tool that can consistently keep up with their demands. The Fluke 902 expands the exisiting line of quality Fluke clamp meters by delivering the features necessary to diagnose and repair HVAC systems. Combined with True RMS technology and a CAT III 600 V rating, the Fluke 902 helps technicians do their jobs safely and accurately.
LH1060/LH1050 Power Clamp Meter (LEM)
The functionality of a current clamp and
a power and
harmonics meter in a single
handheld instrument.
The LH1050/1060 Power Clamp Meters are essential tools for power measurement and diagnostics on switching loads such as drives and high efficiency lighting. They combine the functionality of a current clamp and a power and harmonics meter in a single handheld instrument that has been designed for safety and ease of use.
The range of measurements offered by
the LH1060 is suitable for:
• Installing and testing of ac and dc
power systems
• Measurement of harmonics voltage and
current on industrial systems
• Power and energy optimization
High current, large jaw clamp for industrial
and utility applications
The LH2015’s large jaw is suitable for current measurements up to 2000 A ac/dc on large conductors or bus bars. The LH2015’s measurement accuracy is unaffected by external magnetic fields or off-center conductor positioning due to its advanced jaw design. Its Display-Hold feature freezes the measurement for viewing after measuring and the MAX-Hold captures the maximum measured current.
Current clamp measurement can be used when:
• It’s not possible to power down equipment
and break the circuit
• Checking the current on large loads to
avoid overheating of conductors
• Measuring large dc currents in Industrial
Drives
• 2000 Amp current measurement
• Accurate True RMS measurement for
distorted waveforms
• Large 50 mm (2 in) jaw capacity
• Autoranging and Auto-zero
• Display-Hold and Max-Hold (Surge)
• 2-Year Warranty
LH41 AC/DC Low Current Clamp Meter (LEM)
The compact, accurate ac/dc current
clamp meter
The compact size of the LH41 makes it ideal for taking general measurements on small conductors. Its excellent accuracy and resolution of 1 mA offers exceptional performance at a reasonable price.
If you’re working on battery-based systems monitoring of load current on small and medium ac and dc loads the LH41 is an excellent choice. It’s capability for comparison of dc sensor and control circuits make it the ideal troubleshooting tool.
• Easy use autoranging ac/dc leakage
current measurements from 10 mA to 40 A
• High 1 mA current resolution for quick
circuit comparison on sensor and control circuits
• Patented jaw design for high accuracy low
dc current measurement ensures
no interference from other circuits
• Push button dc Auto Zero for
correct measurement every time
• Battery saving auto power off function
• ‘Carry everywhere’ pocket size
lightweight design
• Convenient Display Hold for
capturing measurement in inaccessible
spots
• 2-Year Warranty |
