MULTIMETERS
                                ----------------

AVOMETER Model 8 Mk7
Analogue Multimeter

• Basic d.c. accuracy ±1% of full scale
  deflection, d.c. sensitivity 20 000 ohms/volts
• Fuse protection on all functions and ranges
  for increased instrument and user protection
• Robust centre-pole meter movement
  with a mechanical cut-out for over load protection

The AVOMETER® Model 8 Mk 7 is a general-purpose, portable, analogue multimeter for the measurement of voltage, current and resistance.

DCM-R Series Model DCM24R, 204R, 104R
AC/DC True RMS Digital Clampmeter

• a.c. and d.c. Amps, Ohms, Diode and Continuity
• RMS measurement
• Auto-ranging and auto-zeroing
• Excellent accuracy

Megger's DCMR Series of digital clampmeters have a 4 digit LCD and are available in different version for maximum currents of 200A, 1000A and 2000A. They feature auto-ranging and auto-zeroing and can measure a.c., d.c., pulsed and mixed currents.

LCR131
UNIVERSAL LCR METER

• Dual Display, Dual - Parameter Measurements
• 0,5% Basic Accuracy
• Parallel/Series Mode
• Relative Mode for Deviation Measurement

The Megger Universal LCR Meter is a portable instrument designed for quick, easy testing and analysing of discrete components in a broad range of applications. The unit will accurately measure the value of inductances, capacitances and resistances at frequencies of 120 Hz and 1 kHz.

Megger AVO300 series
Digital multimeters

• Designed for Electricians
• Fully auto ranging
• Large display characters
• Separate battery and fuse cover
• Data hold
• Min/Max store
• IEC 61010 compliant
• Suitable for applications to CATIII 600 V

The AVO300 range of Megger digital multi-meters are tough compact instruments designed for the contracting electrician, but are also suitable for a wide range of applications and users.

Both instruments offer a range of measurement modes for AC and DC applications, resistance and current measurement.

MEGGER DCM Current Clamps
Digital Clampmeters

• Excellent Price Performance
• Three Models 400 A,
• 600 A and 1000 A
• Drop Proof
• EMC & IEC1010 Compliance

AVO's DCM clampmeters are the ideal instruments for use in the installation, maintenance, monitoring or checking of electrical systems and equipment.

MEGGER DCM1000P
PowerClamp/Digital Clampmeter

• Excellence Price Performance
• Measures power quantities on 1-f & 1-f systems
• d.c. & a.c. True RMS response
• Real-time bargraph display
• Auto-sensing a.c./d.c./(a.c.+d.c.)
• Built-in digital output
• Auto-ranging

The AVO DCM1000P is an advanced clampmeter, giving true RMS readings of not only current and voltage, but of power quantities too. It measures a.c. and d.c. true RMS, giving accurate results even with distorted waveforms.

MEGGER DCM2000P
Power Clampmeter

• W, VA,VAR, kWh AND Power Factor measurement even on distorted waveforms
• AC/DC Current up to 2000Amps
• True rms, Peak, Crest Factor, THD, DF,Frequency measurement, and DC Ripple
• 3 Phase Power capability
• Live Harmonic Analysis, bargraph display

The MEGGER® DCM2000P Power Clampmeter combines the functionality of power meter, oscilloscope, harmonics meter and data logger in one easy to use package.

MEGGER DCM300E
Leakage Clampmeter

• 0.01 mA resolution
• EMC and EN1010-2-32 compliance
• 30 mA, 300 mA, 30 A and 300 A range

The DCM300E Earth Leakage Clamp designed primarily to check earth leakage currents with a dedicated 30 mA range providing resolution down to 10 µA. The capabilities of the DCM300E extend to measuring currents of up to 300 A ac, making it a highly versatile instrument capable of taking current measurements in a wide variety of situations and applications.

Megger MMC850
Multi / single core a.c. clampmeter

• Single, two or three core cable measurement
• Flat or round section cables
• No need to split wires
• Cable centralising clamp
• Backlit display
• 50Hz and 60Hz supplies
• IEC 1010-2-032, CAT III 600 V safety protection

Use the MMC850 anywhere where you want to measure current without breaking a circuit or splitting cables

MEGGER M7000/M8000 Series
Dual Display Digital Multimeters

• 4,000 and 40,000 count
• Dual display
• Analog bargraph updates 128
  times every second
• True rms d.c. + a.c. and Average Responding
• Basic accuracy from 0.08%

The M7000/M8000 Series of advanced analog/digital multimeters from Megger use the latest microprocessor technology to provide the most comprehensive measuring ranges and features in a hand held instrument.