INSULATION TESTERS
-------------------------
MEGGER BM15 & MJ15
5 kV Insulation Testers
Four test voltages to 5 kV
Dual power supply option giving
the best of both worlds
Resilient mounted analogue scale
for robustness
Voltage range to 600 V indicates auto
discharge
Pass/fail overlays for rapid testing
Single scale for insulation values
to avoid operator error
The MEGGER ฎ BM15 & MJ15 are com-pact 5 kV insulation testers. They are very simple to use and provide a quick and accurate reading of insulation resistance. The instruments use an analog display with a maximum reading of 20 G?. The BM15 is powered by batteries. The MJ15 has an additional hand-cranked generator.
Megger MEG10-01
10 kV Insulation Tester
Insulation resistance measurement to 35 T?
Polarisation index, PI, and dielectric absorption ratio, DAR
Step voltage, SV, and dielectric discharge, DD
Three alarms and three timers
USB and RS232 output
Backlit display
Supplied ready for use with FREE calibration certificate
Megger MIT1020
Diagnostic insulation resistance tester 10kV 10 kV insulation resistance tester
Mains or battery powered
Digital/analogue backlit display
Variable test voltage from 50 to 5000 V
Automatic IR, PI, DAR, SV and DD tests
Measures to 35 T?
RS232 and USB download of results
The new 10 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. IEEE 43-2000 recommends the use of 10 kV for motor windings rated above 12 kV and the Megger MIT1020 facilitates this.
Megger MIT510
Insulation resistance tester 5kV
Mains or battery powered
Digital/Analogue backlit display
Selectable test voltage from 250 to 5000 V
Automatic IR test
Measures to 15 T?
Complete with calibration certificate
Designed specifically to assist you with the testing and
maintenance of high voltage electrical equipment. The case
is incredibly rugged and easy to carry, being made of tough
polypropylene and achieving an ingress protection rating of
IP65. In addition, the model number is marked on both the
top and side of the case for ease of identification in stores or vehicles.
Megger MIT520
Diagnostic insulation resistance tester 5kV Testing up to 5 kV
Mains or battery powered
Digital/analogue backlit display
Variable test voltage from 50 to 5000 V
Automatic IR, PI, DAR, SV and DD tests
Measures to 15 T?
RS232 and USB download of results
The new 5 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry, being made of tough polypropylene and achieving an ingress protection rating of IP54. In addition, the model number is marked on both the top and side of the case for ease of identification in stores or vehicles.
Megger S1-1052
High current insulation resistance tester 10kV High output current 5 mA for fast charging of capacitive loads
Testing up to 10 kV
Mains or battery powered
Digital/analogue backlit display
Variable test voltage from 50 to 10000 V
Automatic IR, PI, DAR, SV and DD tests
Measures to 35 T?
RS232 and USB download of results
This new 10 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment.
MEGGER S1-5001
5 kV Insulation Tester
Polarisation index, PI, and dielectric absorption ratio, DAR
Step voltage, SV, and dielectric discharge, DD
Insulation resistance measurement to 15 T?
Mains and battery powered testing
Three alarms and three timers
USB and RS232 output
Real-time download
Data storage
Backlit display
Supplied ready for use with FREE calibration certificate
Insulation resistance test voltages up to 10 kV
Insulation resistance measurement to 35 T?
MEGGER S1-5005
5 kV Insulation Tester
Insulation resistance measurement to 15 T?
Mains and battery powered testing
Three alarms and three timers
USB and RS232 output
Data storage
Backlit display
Supplied ready for use with FREE calibration certificate
Insulation resistance test voltages up to 10 kV
Insulation resistance measurement to 35 T?
Megger S1-5010
Graphical insulation resistance tester 5kV
High specification 5kV tester
Automatic test sequence
PC control and display option
On-board results storage
The SI-5010 is an advanced insulation tester for measurement of insulation resistance of all types of electrical equipment. The instrument performs automatic tests, enabling consistent operation without operator input, plus stores results and can be operated from a PC.
Megger S1-552
High current insulation resistance tester 5kV
High output current 5 mA for fast charging of capacitive loads
Testing up to 5 kV
Mains or battery powered
Digital/analogue backlit display
Variable test voltage from 50 to 5000 V
Automatic IR, PI, DAR, SV and DD tests
Measures to 15 T?
RS232 and USB download of results
The new 5 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment.
PowerDB
Acceptance and Maintenance Test Data Management Software 160+ industry standard test forms are provided
Data trending for predictive failure analysis
Built-in information processing:
equation calculations, temperature
correction factors and charting
Create new forms or customize our forms
One-Step generation of test documentation package
Import data from other sources
Test instrument control and data acquisition
The Megger PowerDB is a powerful software package providing data management for each of your acceptance and maintenance testing jobs.
BMM2000 Series
MEGGER Pemium Insulation Multimeters Insulation measurement up to 200 Gohm (BMM2080)
200 mA Continuity Range
Voltage, current and low resistance measurement
Backlight
mV Transducer inputs
Electronic Locking Test Button
Remote control switched probe
Waterproof and Dustproof to IP54
The Meggerฎ BMM2000 series of Insulation
Multimeters utilise advanced microprocessor technology to
provide a host of new features not normally associated
with standard insulation and continuity testers.
Extended Range Insulation ResistanceTesters
Insulation Resistance Testers, 210170 and 210600
Multiple test voltages
Guard terminal to eliminate surface leakage current
Voltage indicating range
These Insulation Resistance Testers are the ideal instruments when high ranges are needed for measuring insulation resistance. Both provide excellent test voltage regulation and an external guard terminal to eliminate surface leakage current from the measurement.
Major MEGGER Insulation Testers
Insulation Testers, 212159, 212359, 212459, 212559
No scale multipliers
Multiple test voltages for spot and step voltage testing
Guard terminal to eliminate surface leakage current
Four models are available for general purpose testing which include a low-voltage model. All are portable, self-contained instruments designed to give rapid and accurate measurements.
Megger BM12
Multivoltage analogue insulation and continuity tester
Standard d.c. test voltage 100V, 250V 500V and 1000V
Guard terminal
Continuity range with polarity reversal
Automatic discharge
Battery operated
The Major Meggerฎ insulation and continuity testers BM12 are modern, portable, self-contained instruments
designed to give rapid and accurate measurements.
MEGGER BM121, BM122 and BM123
Hand-held Insulation Resistance and Continuity Tester
The Megger BM120 series of Digital Insulation and Continuity Testers offers a cost efferctive solution to testing where only basic test facilities are required. Instruments are available with single insulation test voltages of 500 Vd.c. or 1000 Vd.c. and test results are displayed on a clear 3-digit autoranging LCD. Full rated test voltage is produced when supplying up to 1mA load.
MEGGER BM220 Series
Hand-held Insulation Resistance and Continuity Testers
The Megger BM220 Series of Analog/Digital Insulation and Continuity Testers comprises a range of instruments which offers comprehensive test features in a cost effective package.
Combining an analog bar graph display with the simplicity of a clear 3 digit liquid display, the instruments offer a choice of insulation test voltages, with the option of single, dual or triple test voltage instruments. Full rated test voltage is produced when supplying a 1mA load.
MEGGER BM400/2 Series
Analog/Digital Insulation and Continuity Testers
The Megger BM400/2 Series of autoranging insulation and continuity testers, provides simplicity of use in a hand-held instrument designed to IEC1010-1 safety standards. The BM400/2 Series offers a range of single, dual and multi-voltage variants to fit specific applications. The insulation ranges output the nominal test voltage when loaded with 1 mA as specified within these standards. The continuity ranges have a short circuit test current of at least 200 mA. In addition to the insulation and continuity ranges, the BM400/2 series has a resistance range and 2 voltage ranges. The resistance range measures up to 100k ohm on the digital scale and up to 10 M ohm on the analog scale. Due to the low test voltage and current of this range, the instruments can be used to test circuits with sensitive equipment connected, without causing damage.
MEGGER BM80/2 Series
Multi-Voltage Analogue/Digital Insulation and Continuity Testers
The MEGGER BM80/2 Series are multivoltage insulation and continuity testers offering advanced performance, specification and features, and simplicity of use. They have insulation test voltages from 50 V to 1000 V d.c., (500 V max. on BM81/2.) The comprehensive specification is achieved using the latest electronic design and technology.
MEGGER BMM2000ESD
Combined ESD Premium Insulation Multimeter
Complies with the requirements of IEC 61340-5-1
10V ESD test capability
10/100/500V insulation testing
Insulation measurement up to 10 G?
Live circuit warning
Electronic locking test button
Remote control switched probe
Waterproof and dustproof to IP54
The MEGGER BMM2000 ESD Insulation Multimeter has been designed to satisfy the testing of Electro Statis Devices as defined in CEI/IEC 61340-5-1. The instrument utilises advanced microprocessor technology to provide a host of features not normally associated with insulation and continuity testers.
MEGGER BMM2500 Series
Premium Insulation Multimeters
Insulation measurement up
to 200 G?. (BMM2580)
200 mA Continuity Range
Voltage, current and
k?. resistance measurement
Backlight
mV Transducer inputs
Result storage and Data Logging
PowerSuite Compatible RS232 output
Download Manager Software included
Direct Printer Output
Remote control switched probe
IP54 Waterproof and Dustproof
Megger BMM500
Insulation and Continuity Tester
Options of 250 V, 500 V, 1000 V
insulation ranges
200 mA continuity range
Instant response ZAP buzzer
Voltage measurement to 600 V
MEGGER Intelligent Safety System
Patented backlit display
K Ohms range for servicing
Probe support for other measurements
Waterproof and dustproof to IP54
Complies with the requirements
of BS 7671 16th Edition, and EN61557
MEGGER BMM80 Series
Premium Insulation Multimeters
Insulation measurement to 200 Gohm
200 mA Short Circuit Current output
mV Transducer inputs
Test lead/transducer null facility
Backlight
Remote control switched probe included
Capacitance Measurement to 10 ตF
AC/DC voltage measurement to 500 V
Waterproof and Dustproof to IP54
Megger MIT200 Series
250V 500V and 1000V Insulation and
continuity tester
Insulation testing to 1000 M?
Continuity testing at 200 mA down
to 0.01 ?
Live circuit warning (voltage display)
and test inhibit
Digital/Analogue display
Alkaline or rechargeable batteries
10?C to +55?C operating temperature
CATIII 600 V
Conforms to EN61557-1
Megger MIT300 series
Insulation tester for electricians
Extremely easy to use
Tough rubber armoured case
Self contained protective cover
Live circuit warning
Weatherproof to IP54
Intelligent Safety System for protection.
Megger MIT400 series
Industrial maintenance insulation and continuity testers
CATIV 600V applications
Insulation testing to 1000V and to 200G?
TRMS & DC Voltage measurement
Continuity testing at 200mA down to 0.01?
Analogue and dual digital display
Insulation & continuity limit alarms
PI/DAR and Timer function
Test result storage
Bluetooth wireless data transfer
Free calibration certificate included
Megger MIT40X
Special applications insulation and
continuity testers
Variable insulation test voltage from
10 V to 100 V
Insulation resistance from 2 G? to 20 G?
Continuity testing at 200mA down to 0.01 ?
TRMS & DC Voltage measurement
Frequency measurement 40 Hz to 400 Hz
The MIT40X insulation and continuity tester offers an easy-to-use products for those how have awkward insulation resistance measurement applications where a lower test voltage is needed. The MIT40X test voltage can be selected over a range from 10 V to 100 V. Applications include avionics, marine and other military applications, manufacturing, electrostatic measurement and component testing.
Megger MIT480 series
Telecoms insulation and continuity testers
75V Live circuit inhibit
600V CATIV applications
TRMS Voltage measurement
Continuity testing at 200mA down to 0.01?
Insulation testing to 1000V and to 200G?
Analogue and dual digital display
Capacitance measurement
Cable length by capacitance measurement
PI, DAR and timed testing available
Frequency measurement
Bluetooth wireless data transfer
Free calibration certificate included
Megger MJ10
Multivoltage analogue insulation and
continuity tester
Standard d.c. test voltage 100V, 250V 500V and 1000V
Guard terminal
Continuity range with polarity reversal
Automatic discharge
Low voltage brushless a.c. generator
Megger MTK300 series
Test kit for for electricians
Three kit options available
Rubber armoured instruments
Weatherproof IP54
Test leads included
Calibration certificates included
3 year warranty
The MTK300 series test kits cover all the test requirements
of the electrical engineer performing electrical inspection
and testing on domestic, commercial and industrial
installations for single and three phase applications.
MEGGER WM6
Insulation and Continuity Tester
Pocket-sized, selfpowered instrument
no battery maintenance problems
Tests at 500 volts d.c.
Powered by an easy-toturn, low-voltage,
ac brushless generator
The Wee MEGGER WM6 tester is a self-contained instrument designed
to give rapid and accurate resistance measurements. The hand-operated
generator is coupled with the latest electronic technology, thus allowing the
WM6 to test insulation at 500 V d.c. up to 200 M?
|
