OLP 6

• The wide dynamic range from-60 to +10dBm
• Suitable for applications involving multi-mode and   single mode fibers
• The OLP-6 can be combined with either the OLS-5   LED Source or the OLS-6 Laser Source to from an   Attenuation
  Test Set

• The OLP-6 can be switched to the following
 standard wavelengths to cover the widerange
 of applications: 780
 (HYTAS), 850, 1300, 1310 and 1550nm
• Reference level can be stored for each wavelength   separately



PCM channel analyzer

PCM channel analyzer for CODEC and line card tests
With the PCM-40 Channel Analyzer, automatic test sequences can be produced by combining several test configurations together from a range of stored setups. All of the measurement functions included in the PCM-40, along with any variations in test variables, parameters, and tolerance limits, can be used in any order. In addition, the sequence can be programmed to stop if an incorrect result is obtained or before each different measurement task.

Highlights

Ideal for installation, line-up, monitoring, and fault location of communication systems and networks.
High accuracy and reproduction of test results.
Applications
CODEC and line card tests on PCM multiplexes and digital exchanges.
Long-term monitoring of 2 Mbps paths.
Quality monitoring in an idle channel.
BERT and alarm tests including G.821.
Testing and maintenance of 2 Mbps leased lines.
Key Features
Complete digital and analog tests to ITU-T recommendations G.712 and O.133/O.162.
Optional co-directional and contra-directional 64 kbps interfaces to ITU-T G.703.
Complex impedances.
User-defined variable test parameters, automatic test sequences, graphical tolerance masks, code measurements, frames, and CAS measurements.
Large memory for measurement results and setups.


OTDR

The OTDR and Loss Test Set Plug-in Modules are a wide product line of optical modules offering full coverage of testing applications, including insertion loss, power, fault location, and OTDR measurements.

Highlights
Field interchangeable single-slot optical plug-ins.
Comprehensive product line that enables you to determine price/performance points for any network from LAN/WAN to very long haul.
The MTS-5100 Tester allows up to two plug-ins to be housed simultaneously, enabling several quad-wavelength multimode and singlemode configuration




ANT5- SDH Access Tester

• Bit Error Rate testing.
• Performance analysis according to international   standards: G.821, G.826, G.828, G.829,   M.2100,M.2101 and ANSI.
• APS-measurement including Service Disruption.
• Round Trip Delay measurement.
• Pointer generation and analysis.
• Overhead generation and analysis including path   trace [in Hex and clear text format (interpreter)].
• TCM generation and analysis.
• K-Byte generation, analysis and capture.



ONT-50


The ONT-50 is the ONT family's portable mainframe incorporating optical and digital test modules. It is optimized for early adaptation of new technologies in optical networks. The ONT-50 can be equipped with up to 4 different modules, for various applications, that have the ability to run tests simultaneously.

• It tests line rates from 1.5 Mbps to up to 10.7   Gbps.

• Industry's first fully functional New Generation   SONET/SDH and G.709 OTN test solution.

• Dual-channel Optical Spectrum Analyzer with   channel drop functionality for efficient testing of   modern switched DWDM networks.

• Enables multiple users to perform testing   simultaneously, even with different applications.

• Easy remote operation by one, or up to four,   persons.

• Supports test automation