RELAY TEST EQUIPMENT
                   ----------------------------

AVTS - Software
Relay Test Modules

For more information or to purchase
modules call: 1-800-723-2861

Listed are the available AVTS Relay
Test Modules. Test Samples are
available for specified relays located
in the right hand column.

Module Name......Catalog No.
ABB DPU-2000R .......544042
ABB TPU-2000.......544073
ABB TPU-2000R.......544081

Basler BE1-25 .......544052
Basler BE1-27/59 .......544056
Basler BE1-40Q .......544054
Basler BE1-51 B4 Curve .......544085
Basler BE1-51 B5 Curve .......544087
Basler BE1-51 B6 Curve .......544089
Basler BE1-51 B7 Curve .......544090
Basler BE1-59N .......544093
Basler BE1-87T.......544905


AVTS - Software
Advanced Visual Test Software

• Test Module Wizard makes creating
  a new test easy.
• No programming skills required.
• Import PulseMaster test files to run
   in the new AVTS test environment.
• Scan into AVTS a time current
   curve or any relay characteristic
   and verify Pass/Fail operation
   against that characteristic.
• View and replay Digital Fault
   Recordings or EMTP/ATP simulations
   that are in the COMTRADE file format.

EPOCH-20
High-Current Output Unit

• 600 VA of high current
• Completely compatible with PULSAR
   and EPOCH-10‚ protective relay test
   equipment
• Accurate test results

The EPOCH-20 is a high-current output unit designed to be controlled by the PULSAR (in combination with the High-Current Interface Module) to produce a rugged, portable, high-current, high-volt/ampere test set. The EPOCH-20 also can be controlled by the EPOCH-10 Relay

EPOCH-II
High-Current Output Unit

• 1000 VA of high current
• Rugged, portable test set
• Up to 187 Amperes maximum output

The EPOCH-II is a high-current output unit designed to be controlled by the PULSAR in combination with the High-Current Interface Module to produce a rugged, portable high-current, high-volt/ampere test set.

MEGGER PCITS2000/2
Primary Current Injection Test Set

• Test relay protection systems and their
  current transformers together
• Current level maintained though test
  circuit resistance may rise due to heating
• Built-in timer to record protection
   relay operation

MEIU
MPRT EPOCH Interface Unit

•  Interconnects MPRT to Multi-Amp
    EPOCH-II or EPOCH-20 unit.
•  MPRT Touch View Interface provides
    manual control of the EPOCH-II/20 output.
•  Automated control via AVTS software.
•  High Power EPOCH-II/20 units
   provide capability to test panel of
   relays or high burden electromechanical
   ground overcurrent relays at high
   multiples of    tap.
• EPOCH-II/20 can be used to perform
   transient DFR playback, when high test
   currents / VA are required.

The Megger MEIU adds high-current, high volt-ampere output capability to the MPRT relay testing capability.

MGTR
GPS Timing Reference

• Small and Lightweight
• Easy to use Programmable Output
   Pulse for Synchronized end-to-end
   testing
• 100 ns Accuracy within minutes of
   startup, 12-channel GPS Timing
   Receiver
• Near-Rubidium stability during tem-
   porary GPS signal loss
 
The Megger MGTR is a GPS satellite receiver system that performs end-to-end tests of line protection schemes with Megger MPRT and Pulsar relay test systems.

MPRT
Protective Relay Test System

• The MPRT System consists of a
  ‘Power Box’, the TouchView
   Interface™, and      AVTS Software
• Unique new TouchView Interface
  (TVI) simplifies the manual testing
   of complex relays
• Ultra flexible output design provides
   up to four-phase voltage and current
   or eight-phase current
• User specified configuration. Every
   system is made to order based
   on specific customer needs.
• Includes fully automated testing
   capability using AVTS Software (Version 2.0)

The MPRT is designed to perform routine testing of protective relays used in the operation of electric utilities, power plants and heavy industrials, and eliminates the complexity of relay testing.

NRTS-2
Network Protector Test System

• Built-in relay test adapters to reduce
  setup time and improve productivity
• Controls and instrumentation
  conveniently located for ease of operation
• IEEE-488 interface for a semi-
  automatic, programmable test system


The Model NRTS-2 Network Relay Test System consists of the necessary single-phase and three-phase ac current and voltage sources to calibrate network relays accurately and efficiently.

NTS-300
Network Relay Test Set

• 50 ft (15.2 m) test cable
• Two-piece design for easy portability
• Solid-state, digital timer
• Additional phase angle settings for
   testing protectors that incorporate
   solid-state relays
The Model NTS-300 is a self-contained, two-piece test set designed for complete testing of General Electric and Westinghouse secondary network protectors.

The two-piece design of Model NTS-300 enables the user to transport the unit and easily lower it into a manhole.

PMM-1
Power Multimeter Multi-function Measuring Instrument

• Simultaneous measurement and
   display of all three-phase system
   parameters
• Accurate phase angle measurement
  at low current levels
• Versatile, menu-driven instrument with
   a built-in timer and data-logging

PowerDB
Acceptance and Maintenance Test Data Management Software

• 160+ industry standard test
   forms are provided
• Data trending for predictive failure
   analysis
• Built-in information processing:
   equation calculations, temperature
   correction factors and charting
• Create new forms or customize our
    forms
• One-Step generation of test
   documentation package
• Import data from other sources
• Test instrument control and data
   acquisition

The Megger PowerDB is a powerful software package providing data management for each of your acceptance and maintenance testing jobs.

PULSAR
Universal Protective Relay Test System

• Complete three-phase relay test system
• One-box design for portability
• 150 VA rms power

This modular unit is the smallest, most lightweight system for testing all types of protective relays. With its new, 150-VA current amplifier module, PULSAR produces the higher compliance voltage required to easily test even high-impedance relays. Advanced software automates steady-state, dynamic and transient and end-to-end testing.

PulseRamp - Software
Graphical Relay Test Software Program

• Test virtually any impedance
    relay characteristic
• 'Click-On-Fault' feature provides
   point-and-click testing of any impedance
   relay
• 'PulseRamp' feature provides dynamic
    testing of impedance relays
•  No Computer programming skills required

PulseRamp relay testing software enables the relay technician to easily perform steady-state and dynamic testing on virtually any impedance relay, no matter how complex the operating characteristic

PulseVector - Software
Graphical Relay Test Software Program

• Simple "point-and-click" operation
• Does not require computer programming skills
• Performs steady-state and dynamic tests

The PulseVector Relay Test Software enables the relay test technician to easily perform steady-state and dynamic tests on virtually all protective relays. PulseVector provides simple "point-and-click" operation - computer programming skills are not required for technicians to develop automatic relay tests.

RelayTestWare Computerized Relay Test Procedures - Software

Computerized Relay Test Procedures for Specific Relay Models
• Series of relay test procedures for
  most of the popular relay models
  available today
• Connection diagrams, setting
   input screens and detailed instruction
   manuals are included
• No programming is required

SCITS100
Secondary Current Injection Test Set

• Test outputs to 100 A a.c., 240 V
   a.c., 240 V d.c.
• Auxiliary output to 120 V a.c.
   for directional relays
• Integral custom timer for testing
   IDMT relays or circuit breakers
• Automatic protection against current
   or thermal overload

The SCITS100 Secondary Current Injection Test Set has a maximum rating of 100 A/1,8 kVA and a built-in timer unit. The test set is constructed in a rugged metal case with large carrying handles for practical field operations. The SCITS100 will test instantaneous relays, IDMT relays, directional relays, moulded circuit breakers and metering.

SITS-120
Secondary Injection Test Set

• Digital metering includes memory ammeter
• Timer has independent start and stop gates
•  Interface provided for EPS-1000A/PVS-1000     Phase Shifters

The SITS-120 incorporates high current and ac/dc voltage output capability, digital instrumentation and unique features for testing protective relays, small molded case circuit breakers, motor overload relays and timing applications. A phase shifter interface allows the SITS-120 to be used with the new EPS-1000A/PVS-1000 Phase Shifters for testing complex relays.

SR-90
Universal Protective Relay Test Set

• All-digital metering
• Memory ammeter
• Units 1 and 2 work independently

This multi-purpose, two-piece test set quickly and accurately calibrates, performs acceptance testing and troubleshoots most popular solid-state and electromechanical relays. Model SR-90 also can be used to test small molded case circuit breakers and motor overload relays, and for timing circuit breakers. These manually operated units work separately to test simple relays or can be interconnected to provide four simultaneous outputs for more complex relays.

SR-98
Universal Protective Relay Test Set

• Digital Signal Processor Based Technology
• High Current/High Power Output
• Easy to Read, Large LCD Display
• 0 to 360° Phase Shift Capability
• RS-232 and Parallel Printer Ports

The SR-98 is the newest addition to the long, successful line of Megger "SR" series, like the SR-51, SR-76 and SR-90 relay tests. With almost 50 years of relay testing experience, the SR-98 incorporates the latest in Digital Signal Processor (DSP) and microprocessor-based technology to provide a powerful, easy to use relay test set.

SST-9203
Solid-State Digital Timer

• Versatile timing instrument for
   many utility applications
• Rugged design for years of daily field use
• ±0.0001-second accuracy
• Battery or line operated

The SST-9203 Solid-State Digital Timer combines ruggedness and reliability with state-of-the-art technology to make it an accurate and versatile timing instrument available for utility applications.

TCM-915S
Timer-Control-Monitor Unit

• Fifteen voltage wet or dry inputs
• Nine output contacts
• Stand-alone capability

This versatile instrument is designed as a sequence of events recorder, to monitor and time inputs and enable the user to conditionally control outputs, to simulate circuit breaker, reclose and carrier control operation in a real-time environment.