| TIME DOMAIN REFLECTOMETERS
------------------------------------
MEGGER BTDR1500 (CFL800E US Market)
Hand-held Time Domain Reflectometer
110m to 3Km TDR Measurement Ranges
Automatic Resistance Bridge with
Measurement range up to 100Km
Built in Insulation tester,DC Voltmeter
and Loop Resistance Meter
Suitable for Telecom, Coax, Datacom
and Power Cables
Dust and Shower Proof to IP54
The MEGGERฎ BTDR1500 is an advanced instrument capable of identifying nearly all types of cable fault using both Time Domain Reflectometry and Automatic Resistance Bridge Techniques.
It offers exceptional features and a range capability normally associated with larger, more expensive products.
MEGGER QualiFyr TDR500
Time Domain Reflectometer TDR500
Simple operation
Warble tone generator
Velocity factor from 0.30 to 0.99
Range to 10,000 ft (3 km)
Tough ABS case
IP54 environmental protection
Carry case and test leads included
3-year warranty
The MEGGER QualiFyr TDR500 cable fault locator breaks new ground as a cost-effective, high specification hand-held Time Domain Reflectometer for locating faults on metallic cables. Designed for the field engineer requiring a low cost solution to field testing, the QualiFyr TDR500 offers all the benefits of MEGGER quality and reliability in an affordable package.
MEGGER TDR1000/2
Time Domain Reflectometer TDR1000/2
Simple operation
Fast fault find facility
TX Null transmission pulse nulling
Adjustable cable impedance
No blocking filter required
IP54 rating
3 year warranty
The TDR1000/2 is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1m/0.3ft and a 3km/9kft maximum range depending on Velocity factor selected and cable type.
Four output impedances are available (25, 50, 75, and 100 ohms) and a velocity factor between 0.30 and 0.99 will meet any cable test requirements.
MEGGER TDR2000/2
Time Domain Reflectometer TDR2000/2
20 km range at VF = 0.90
Monochrome or colour options
Primary cell or rechargeable options
Large back lit LCD Display
Dual cursor measurement
Intermittent fault location
Output pulse amplitude and width control
"TX Null" technology
No blocking filter required
Trace Master PC software included
15 memory trace storage
IP54 Rating
3 year Warranty
The MEGGER TDR2000/2 is a state of the art, monochrome or colour, dual channel Time Domain Reflectometer, capable of identifying and locating a wide range of faults on metallic cables.
MEGGER TDR2000/2P
Dual Channel Cable Fault Locator
Specifically for the Power industry
Fused Croc-clip lead set 2m
300V CAT III (415V Phase to Phase)
Intermittent fault location
No blocking filter required
15 memory trace storage
Weather proof to IP54
The Megger TDR2000/2P is a state of the art, Monochrome dual channel Time Domain Reflectometer, capable of identifying and locating a wide range of faults on metallic cables from a few meters to 20km depending on cable type.
The TDR2000/2P is ideal for engineers with little TDR experience. The TDR20000/2P can perform single or dual channel measurements on a wide range of metallic cables.
Megger TDR900
Hand-held Time Domain Reflectometer/Cable Length Meter
Full autoranging for measuring the
length of power, telephony, CATV
and LAN cables, provides distance to an
open or short.
Extra large, high resolution backlit LCD.
Automatic output impedance control
of 25, 50, 75, 100, 125 or 150 ohms.
User-friendly menu on screen operation.
Cable length calibration function.
Internal library of 39 standard cable types.
The Megger TDR900 is an advanced instrument capable of measuring cable lengths and finding distance to an open or a short using Time Domain Reflectometry. It offers exceptional features and a range capability normally associated with far more expensive instruments. The measurement range spans from 15 feet (5 m) to 10,000 feet (3 km) with a minimum resolution of 20 inches (50 cm). |
